We help to make the right choice of the equipment by providing professional and diligent consultation.

Upon your request, we adjust our products to specific requirements and provide adequate equipment.

Pumps for barrels and drums of the DINO series DIN/HD-PPHT

The pumps is designed for safe unloading of content from various tanks, drums, palette base bulkiboxes, barrels, cans. The suction pipe is made of polypropylene resistant to high temperature (PPHT).

Application: aggresive liquids, pesticides, detergents, etc.

Available various lengths of the suction pipe [mm]: 700, 1000, 1200, 1500, 1800.

Pumps for barrels and drums of the DINO series DIN/HD-PVDF

The pumps is designed for safe unloading of content from various tanks, drums, palette base bulkiboxes, barrels, cans. The suction pipe is made of polyvinylidene difluoride (PVDF).

Application: concentrated acids and alkali as well as other chemical products of the highest aggressiveness

Available various lengths of the suction pipe [mm]: 700, 1000, 1200, 1500, 1800.

Pumps for barrels and drums of the DINO series DIN/HD-SS316

The pumps is designed for safe unloading of content from various tanks, drums, palette base bulkiboxes, barrels, cans. The suction pipe is made of stainless steel (SS 316).

Application: aggressive liquids, alcohols, solvents, detergents, cosmetic and pharmaceutical fluids, petrochemical products, etc.

Available various lengths of the suction pipe [mm]: 700, 1000, 1200, 1500, 1800.

Pumps for barrels and drums of the DINO series DIN/HD-SS316-VV

Screw pumps for liquids with high viscosity (up to 100 000 cP).

The most frequent applications include polymers, grease, paints, shampoo, resins, etc.

The key advantage of screw pumps is pulsation-free and laminar flow of liquid.

The pump rotor is manufactured with high accuracy of acid-resistant steel (316L) and its stator is made of teflon (PTFE). It guarantees excellent forcing parameters and enables safe and fault-free operation.

Available various lengths of the suction pipe [mm]: 700, 1000, 1200.

Electric motors for pumps of the DINO series

For pumps of the DINO HD series:

  • DIN/HD-E2-V 0.50kW / 230V
  • DIN/HD-E3-V 1.00kW / 230V
  • JES/HD-E4-Ex 0.55kW / 230V

 

For pumps of the DINO HD-SS316-VV series:

  • DIN/HD-E05A-VV 0.75kW / 400V
  • DIN/HD-E05B-VV 1.15kW / 400V

Pneumatic motors for pumps of the DINO series

For pumps of the DINO HD series:

  • DIN/HD-A1 0.42kW / 6bar
  • DIN/HD-A2 0.55kW / 6bar
  • NAF/HD-A4-Ex 0.35kW / 6bar

For pumps of the DINO HD-SS316-VV series:

  • DIN/HD-A06-VV
  • DIN/HD-A16-VV

Example of a pumping engine:
Electric motor DIN/HD-E3V, pump DIN/HD-PPHT

Example of a pumping engine:
Electric motor DIN/HD-E2-V, pump DIN/HD-PVDF

Example of a pumping engine:
Pneumatic motor DIN/HD-A-1, pump DIN/HD-PPHT

Example of a pumping engine:
Pneumatic motor DIN/HD-A-2, pump DIN/HD-SS316

Example of a pumping engine:
Pneumatic motor DIN/HD-A6-VV, pump DIN/HD-SS316-VV

Electric axial flow propeller pump PES-100(PP)

Technical parameters:

Q = 100 l/min
H = 13 m
G = 900-1200 mm
D = 50 mm
N = 0,55kW/12300 rpm
U = 230V

Note:

Suction pipe made of polypropylene.

Electric axial flow propeller pump PES-25(PP)

Technical parameters:

Q = 25 l/min
H = 8 m
G = 900 - 1200 mm
D = 32 mm
N = 0,25kW/12000 rpm
U = 230V

Note:

Suction pipe made of polypropylene.

Electric axial flow propeller pump PES-25(ST)

Technical parameters:

Q = 25 l/min
H = 8 m
G = 900 - 1200 mm
D = 25 mm
N = 0,25kW/12000 rpm
U = 230V

Notes:

Suction pipe made of 316 L steel grade.

Electric gear pump PEZ-..(PP/0,25kW)

Technical parameters:

Q [l/min] 4 8 11 15 22
H [m] 10 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,25kW/2800 rpm
N = 0,25kW/1400 rpm
U = 230V

Notes:

Suction pipe made of polypropylene .

Electric gear pump PEZ-..(ST/0,25kW)

Technical parameters:

Q [l/min] 4 8 11 15 22
H [l/min] 10 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,25kW/2800 rpm
N = 0,25kW/1400 rpm
u = 230V

Notes:

Suction pipe made of 316 L steel grade.

Electric gear pump PEZ-..(ST/0,55kW)

Technical parameters:

Q [l/min] 8 11 15 22
H [m] 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,55kW/2800 rpm
N = 0,55kW/1400 rpm
U = 230V

Notes:

Suction pipe made of 316 L steel grade.

Electric gear pump PEZ-..(Ex)

Technical parameters:

Q[l/min] 4 8 11 15 22
H[m] 10 18 25 25 25

G= 900 - 1100 mm
D= 54 mm
N= 0,25-0,55kW/1400 - 2800 rpm
U= 400V

Notes:

Motor of the intrinsically safe design.
Suction pipe made of 316 L steel grade

Electric metering gear pump PEZD-..(PP/0.25kW)

Technical parameters:

Q [l/min] 4 8 11 15 22
H [m] 10 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,25kW/2800 rpm
N = 0,25kW/1400 rpm
U = 230V

Notes:

Suction pipe made of polypropylene.

Electric metering gear pump PEZD-..(ST/0.25kW)

Technical parameters:

Q [l/min] 4 8 11 15 22
H [m] 10 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,25kW/2800 rpm
N = 0,25kW/1400 rpm
U = 230V

Notes:

Suction pipe made of 316 L steel grade

Electric metering gear pump PEZD-..(ST/0.55kW)

Technical parameters:

Q [l/min] 8 11 15 22
H [l/min] 18 25 25 25

G = 900 - 1100 mm
D = 54 mm
N = 0,55kW/2800 rpm
N = 0,55kW/1400 rpm
U = 230V

Notes:

Suction pipe made of 316 L steel grade.

Pneumatic gear pump PPZ-..(ST)

Technical parameters:

Q = 0 - 15 l/min
H = 10 m
G = 900 - 1100 mm
D = 54 mm
N = 0,55 kW/2000 rpm
N = 1,30 kW/2000 rpm

Notes:

Motor of the intrinsically safe design
Suction pipe made of 316 L steel grade.

Pneumatic gear pump PPZ-..(Ex)

Technical parameters:

Q = 0 - 15 l/min
H = 10 m
G = 900 - 1100 mm
D = 54 mm
N = 0,55 kW/2000 rpm
N = 1,30 kW/2000 rpm

Notes:

Motor of the intrinsically safe design.
Suction pipe made of 316 L steel grade.

PROGRAMMING DEVICE

Technical parameters:

The device enables:

Programming:
1. Dose
2. Pause
3. Repetitions

Readouts:
1. Volume of liquid transferred

Notes:

The programming device for both electric and pneumatic pumps with a solenoid valve. The device can be also used to control operation of mixers (stirrers).

Manual crank pump HUE/RP90P

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual crank pump HUE/RP90R

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual crank pump HUE/RP90PT

The pump designed to transfer acids, alkali, alcohol, diesel fuel, gasoline, machine lube oil or water from barrels or drums.

Manual crank pump HUE/RP90RT

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual crank pump HUE/RP90PVDF

The pump designed to transfer concentrated acids and alkali, herbicides, alcohols, solvents, detergents and other extremely aggressive chemicals from barrels or drums.

Manual crank pump HUE/RP150P

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual crank pump HUE/RP150PT

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums

Manual crank pump HUE/RP150RT

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums

Manual crank pump HUE/RP91A

The pump designed to transfer gasoline, kerosene or oil from barrels or drums.

Manual crank pump HUE/RP32R

The high performance pump designed for quick transfer of aggressive liquids, alcohol, water, etc. from barrels or drums. To be used for liquids of low viscosity.

Manual crank pump HUE/RP32H

The high performance pump (up to 100 l/min) designed for quick transfer of gasoline, kerosene or oil from barrels or drums. To be used for liquids of low viscosity.

Manual piston pump HUE/RP20PT

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums

Manual piston pump HUE/RP20RT

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual piston pump HUE/P490

The pump designed to transfer alcohol, diesel fuel, gasoline, kerosene, grease and water from barrels or drums.

Manual piston pump HUE/P490S

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual piston pump HUE/R490ST

The pump designed to transfer aggressive liquids, herbicides, detergents, oil, etc., from barrels or drums.

Manual piston pump HUE/T490S

The pump designed to transfer concentrated acids and alkali, herbicides, alcohols, solvents, detergents and other extremely aggressive chemicals from barrels or drums.

Manual piston pump HUE/A490

The pump designed to transfer oil, non-corrosive liquids, etc. from barrels or drums.

Manual piston pump HUE/8806

The pump designed to transfer oil, non-corrosive liquids, etc. from barrels or drums.

Manual piston pump HUE/H304ST

The pump designed to transfer gasoline, kerosene, oil, etc from barrels or drums.

Manual piston pump HUE/H316ST

The pump designed to transfer aggressive liquids, oil, detergents, alcohols, beverages (fruit juice, milk, wine, water), etc., from barrels or drums.

Manual piston pump HUE/JW-300PA

The pump designed to transfer aggressive liquids, herbicides, detergents, oil etc., from barrels or drums.

Manual piston pump HUE/JW-316T

The pump designed to transfer aggressive liquids, herbicides, detergents, oil etc., from barrels or drums.

Manual piston pump HUE/JW-80A

The pump designed to transfer aggressive liquids, herbicides, detergents, oil etc., from barrels or drums.

Manual siphon pump HUE/4A-HDPE

The pump designed to transfer aggressive liquids, herbicides, alcohols, solvents, detergents, etc., from barrels or drums.

Pliki do pobrania

Manual pump GRO/CMP-12

Delivery: Q = 0.40 dm3/stroke
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 15 mm

Pump installation:
support ring Gz = 2”

Notes:

Monolithic suction pipe.

Pliki do pobrania

Manual pump GRO/ERP

Delivery: 0.25 dm3/revolution
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 25 mm

Pump installation:
support ring Gz = 2”

Permitted applications:
oil-based liquids, antifreezes, etc.,

Prohibited applications:
aggressive liquids, solvents, varnishes, gasoline, etc.,

Pliki do pobrania

Manual pump GRO/LBP-04

Delivery: Q = 0.30 dm3/ stroke
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 20 mm

Installation:
support ring Gz = 2”/ Gz = 1 1/2”

Permitted applications:
oil-based liquids, machinery and car lube oils, etc.,

Prohibited applications:
gasoline, diesel fuel, furnace oil, aggressive liquids, etc. and water (entails corrosion of cast-iron and steel parts)

Notes:

Telescopic suction pipe

Pliki do pobrania

Manual pump GRO/PLP

Delivery: Q = 0.50 dm3/suw
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 20 mm

Installation:
support ring Gz = 2”

Permitted applications:
Water-based liquids, detergents, antifreezes, oil, lubricants, herbicides, fertilizers, etc., .

Prohibited applications:
gasoline, kerosene, solvents

Notes:

Two-part telescopic suction pipe.

Manual pump GRO/PRP

Delivery: Q = 0.25 dm3/revolution
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 25 mm

Installation:
support ring Gz = 2”

Permitted applications:
water-based liquids, urea solutions, antifreezes, benzene, glycerin, acids and light products of crude oil refining.

Prohibited applications:
Acetone, acetates, paints, varnishes, solvents, turpentine oil.

Notes:

Three-part suction pipe

Pliki do pobrania

Manual pump GRO/RB-3

Delivery: Q = 0.5 dm3/revolution
For vessels 25 ÷ 200 dm3
Flexible hose: d = 28 mm/1.8m

Installation:
support ring Gz = 2”

Permitted applications:
gasoline, diesel fuel, furnace oil , kerosene, motor lubes, etc.,

Prohibited applications:
aggressive liquids, AIDS, alkali, solvents, etc.,

Notes:

Three-part suction pipe

Pliki do pobrania

Manual pump GRO/RBP-3V

Delivery: Q = 0.25 dm3/revolution
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 25 mm

Installation:
support ring Gz = 2”

Permitted applications:
diesel fuel, furnace oil, machine and motor lube oils, etc.,

Prohibited applications:
gasoline, kerosene, solvents, alcohols, aggressive liquids, paints, varnishes, etc., and water (entails corrosion of cast-iron and steel parts)

Notes:
telescopic suction pipe

Pliki do pobrania

Manual pump GRO/SPH-3

Delivery: Q = 0.20 dm3/stroke
For vessels 25 ÷ 200 dm3
Corrugated flexible hose d = 20 mm

Installation:
support ring Gz = 2”

Permitted applications:
acetone, alcohols, detergents, glycols, phosphoric, sulphuric and hydrochloric acid up to 37%, kerosene, vinegar, acetates, sulphates, diesel fuel, furnace oil, brake fluid, glass washing liquid, solvents and diluents for paining..

Prohibited applications:
asphalt, 5-chloride ethyl benzene, bromine water, nitrohydrochloric acid, hydrogen cyanide, calcium hypochlorite

Notes:
Monolithic suction pipe

Manual piston pump TAR/PR004

Delivery: Q = 0.30 dm3/suw
For vessels 25 ÷ 200 dm3
Forcing nozzle: d = 20 mm

Installation:
support ring Gz = 2”

Permitted applications:
The pump designed to transfer aggressive liquids, herbicides, detergents, oil etc., from barrels or drums.

Prohibited applications:
gasoline, kerosene, solvents

Notes:

Two-part telescopic suction pipe.

Pneumatic membrane pump PPM-...A..(aluminium)

Technical parameters:

Q [l/min] 25 70 120 220 420
H [m] 80
Hss [m] 1,5 3 4 5 5
Hsm [m] 8
φz [mm] 3 4 6 10 15

 

Notes:

PPM-...A..(aluminium) is also available in the teflon-coated design option

Pneumatic membrane pump PPM-...S..(steel 316L grade)

Technical parameters:

Q [l/min] 30 80 125 225 425
H [m] 90
Hss [m] 1 2 4 5 5
Hsm [m] 8
φz [mm] 3 4 6 10 15

 

Pneumatic membrane pump PPM-...P..(polyethylene)

Technical parameters:

Q [l/min] 9 20 50 100 200 400
H [m] 80
Hss [m] 1 1,5 3 4 5 5
Hsm [m] 8 9 9 9 9 9
φz [mm] 2 3 4 6 10 15

 

Pneumatic membrane pump with a mixer

Notes:
Can be used as a membrane pump as well as a mixer

Electric centrifugal pump PEO/CT

Notes:
Design option: steel 316 L grade

Electric metering pump

Electric pump GEM/HTM-PP/PVDF

Mag drive centrifugal pumps. Made of thermoplastic materials.

Electric pump GEM/HVL-PP

Vertical centrifugal pumps. Made of polypropylene (PP)

Electric impeller pump PEW-..(SI)

Notes:
Industrial design option
Elastic rotor (EPDM, NITRYL)

Electric impeller pump PEW-..(SH)

Notes:
Hygienic design option
Elastic rotor (EPDM, NITRYL)

Electric pump for diesel fuel and furnace oil PEN 1/P

Technical parameters:

U [V] 230 AC 24 DC 12 DC
Current [A] 1,8 10 14
Power [W] 320 240 180
Q [l/min] 52 43 38
H [m] 15 10 9
Weight  [kg] 2,5 2,5 2,5
Powering line plug terminals terminals

Suction hose 1.6m with a filter.
Supply hose 4m.
Metering gun.
Switch with backlight.

Electric pump for diesel fuel and furnace oil PEN 1/R

Technical parameters:

U [V] 230 AC 24 DC 12 DC
Current [A] 2,2 12 22
Power [W] 400 300 260
Q [l/min] 50 40 38
H [m] 17 9 9
Weight [kg] 6,2 4 4
Powering line plug terminals terminals

Suction hose 1.6m with a filter.
Supply hose 4m.
Metering gun.
Switch with backlight.

Electric pump for diesel fuel and furnace oil OP 1-60 / OP 2-60

Technical parameters:

U [V] 230 AC 230 AC
Prąd [A] 2,3 2,5
Moc [W] 120 360
Q [l/min] 30 42
H [m] 10 17